Plastic Buckle

Material：POM

Two main parts including male part and female part.
Side release breakaway buckle with angular appearance and anti-slip design on male part of buckle.
Usage: bag buckle, arm sling buckle, etc.

Material：POM

Two main parts including male part and female part.
Acetal quick release plastic clasp with contoured appearance, adjust length of webbing and fasten easily.
Usage: bag buckle, parachute buckle, webbing adjuster, etc.

Material：POM

Two main parts including male and female parts. Acetal quick release dual adjustable plastic buckle with contoured appearance, adjust length of webbing and fasten easily, release the buckle by squeezing both sides of the button at one time, and then fasten the buckle by pushing the male part into the female part in correct direction. Usage: bag buckle, parachute buckle, webbing adjuster, baby carrier, etc. Available sizes in 20mm, 25mm, 38mm, 50mm.

Material：POM

This side release buckle has two components: a male buckle and a female buckle. The length of the webbing on both sides can be adjusted according to users' requirement, and the tightness is fixed through the anti-slip pattern design on the buckle. Paired with webbing, drawstrings, etc., it can be used as a backpack buckle, tool belt buckle, webbing adjustment accessory, etc. Press the buttons on both sides of the buckle with two fingers at the same time and pull out the male buckle to unlock the buckle, the buckle can be released and fastened for tens of thousands times.

Material：POM

Plastic quick release buckle, breakaway clasp. Two main parts including male part and female part, there are anti-slip texture on the side buttons of male buckle, male side is adjustable, which can be used to adjust length of strap to maintain proper tightness, 3/8" (10 mm) is non-adjustable, a slide buckle is required to get webbing adjusted. Usage: bag buckle, webbing adjuster, harness buckle, etc.

Material：POM

Plastic side release buckle for tool belt, waist band, etc. Two main parts including male part and female part, there's no second crossbar either on male or female buckle, so it is generally used on elastic straps or match with an additional webbing adjuster, applicable with 1" (25 mm) webbing.

Material：POM

Plastic center push quick release buckle, two main parts including male part and female part. The male buckle has an opening on the outer crossbar and a double-rod design, making it easier to detach or adjust the webbing based on requirement, unlock by pressing textured front center button on male buckle and then pull it out from the female buckle.

Material：POM

Two main parts including male part and female part. Unlike other common side release buckle with crossbars on both male and female side, this buckle has a hole on male part, fasten the male buckle by passing through the textile along with the top gap, and snapped it by mounting rivet or screw through the hole, this buckle is generally used on bags.

Material：POM

Mini plastic contoured side release buckle, two main parts including male part and female part, which is used as cat collar buckle or paracord bracelet buckle. LOGO stickers can be customized, and stick to the square frame in the middle front of the buckle according to brand promotion needs, and the color of buckle can also be customized.

Material：POM

Mini plastic contoured breakaway side release buckle for cat collars, including male part and female part, which used as cat collar buckle or paracord bracelet buckle, in order to prevent your pet from getting stuck in the tree, the buckle is designed to break away automatically as soon as the tensile strength is over 5 kilograms.

Material：POM

Plastic contoured side release clasp, including male part and female part, used as pet collar buckle, paracord bracelat buckle, etc. Five sizes available: 10mm, 12mm, 15mm, 20mm, 25mm.

Material：POM

Plastic heavy duty side release buckle which has stronger tensile strength, including male part and female part, used as bag buckle, webbing adjuster, collar buckle, etc. This high-strength buckle has a thick and sturdy structural design that can maintain the buckle locked under high-intensity pulling force without loosening, 6 sizes available: 3/8", 5/8", 3/4", 1", 1-1/8", and 1-1/2".

Material：POM

Plastic side release buckle, including make part and female part, there's a reflective plastic chip mounted on the female part, which is used for warning or making it easier to be seen in the dark.

Material：POM

Plastic quick center push release buckle, including male part and female part. To fit preperly on textile products, this center release buckle is designed to be light-weight and thin, it is released by pressing the center puch button and pull out from female buckle, there are pattern on the surface of  button to prove slip, therefore it is commonly be used as cap buckle, backpack buckle, garment buckle, etc. 

Material：POM

Plastic adjustable center push quick release buckle, including male part and female part, the male buckle is adjustable, with slip-proof dots texture on the center button, used as backpack buckle, garment clasp, webbing adjuster, etc.

Material：POM

Including male part and female part, this buckle is straight and has rounded, smooth appearance, which is commonly used as collar buckle, tool belt buckle, life jacket buckle, outdoor equipment buckle, etc.

Material：POM

This buckle with key works with 2" (50mm) straps which consists of a male part, a female part, and a built-in metal key for added security. As it is a non-adjustable buckle, an additional webbing slide buckle is recommended if length or tightness adjustment is required. Featuring a lockable design, this buckle with key offers enhanced safety by significantly reducing the risk of accidental release—particularly useful in applications where child safety is a concern.

Material：POM

The buckle has male and female part with a twist lock button at the front, once switch the center rotary button, the side squeeze button will be locked or unlocked, and people are unable to release it when it is locked, with the lockable feature, this buckle can efficiently reduce the risk of releasing accidentally by children. It's non-adjustable, thus an additional webbing slide buckle is needed if you are going to adjust the length or tightness of the webbing, .

Material：POM

Plastic center push release buckle, including male part and female part, used as badge holder, industrial clothing buckle, collar buckle, cap clasp, or webbing clasp, bag, backpack, etc. The buckle is non-adjustable, please take references of our plastic slider buckle(tri-glide buckle).

Material：POM

Plastic side release buckle for webbing adjusting, including male part and female part, there's anti-slip incised sloping lines on center bar of male buckle, this side release buckle is commonly used in every single industries, complete range of sizees to meet all kinds of requirement, that's why it can be frequently seen in our daily life, such as fanny pack, belt bag, backpack buckle, collar buckle, belt buckle, military equipment buckle, child and enfant dining chairs, etc.