Slide Buckle Series

Material：POM

Plastic slide buckle (also known as tri-glide buckle or webbing adjuster) is used for adjusting length of webbing. Anti-slip stripe design can be found on middle bar of front side and both outer bars of back side. Usage: pet collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

Material：POM

Tri-glide buckle is a typical type of adjust buckle in our everyday life, there are 3 parallel bars, when the webbing passes through and is wrapped around the bars in the correct way, at a specific angle, we can easily pull the webbing to adjust the length. The buckle is made of durable plastic material-POM (Polyacetal), which is lightweight, rust-proof, and resistant to sun/rain, making it perfectly works on outdoor gear, such as backpack strap adjuster or mountaineering gears, available size for this slide buckle is 1-1/4" (32.8 mm), refer to its inner width.

Material：POM

Also known as tri-glide, which is used for adjusting length of webbing, the anti-slip texture on the crossbar is a toothed design, which can stably fix the webbing without loosening. Lightweight but strong and durable.
Usage: pet collar buckle, bag strap buckle, medical sling adjuster, garment accessories, etc.

Material：POM

Also known as tri-glide buckle, with wider inner length, which is used for adjusting length of webbing, the wider slots are appropriate for thicker webbing.
Anti-slip stripe design can be found on middle bar of front side and both outer bars of back side.
Usage: pet collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

Material：POM

Also known as tri-glide, which is used for adjusting webbing or lanyard.
Slide and keeper can be purchased separately.
Usage: swim goggles adjuster, plastic shoes buckle, etc.

Material：POM

Also known as tri-glide, after going through the webbing, it can be pushed forward and backward along the webbing to adjust the length and tightness, the backs of the upper and lower crossbars have toothed anti-slip designs, which can firmly grab the webbing well without slipping. Ideal part for pet harness, collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

Material：POM

Also known as tri-glide, which is used for adjusting length of webbing, toothed anti-slip design at the back to prevent loosing.
Usage: pet collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

Material：POM

Also known as eight-shaped buckle, figure eight buckle, or tri-glide, this slide buckle is generally thinner, so it is an ideal adjustable buckle for lingeries, underwear, or accessoires that are close to skin, there will be no obvious foreign body sensation when wearing it. They are mainly applied for adjusting webbing, lanyard strap, bra strap buckle, goggle adjuster, etc.

Material：POM

Plastic webbing adjusting slider buckle which has anti-slip design, also known as 4 way slide buckle or tri-glide. Provide extra gripping points for the sternum strap with loops on both sides, designed to finish your backpack harness with a chest strap and to keep your pack stabilized. Available for two sizes: 1" (25mm) and 3/4" (20mm). Usages: bag strap adjuster, garment buckle, work wear, etc.

Material：POM

Plastic webbing adjusting slider buckle which has anti-slip design, also known as 3 way slide buckle or tri-glide. Provide an extra gripping point for the sternum strap with a loop on one side, designed to finish your backpack harness with a perpendicular chest strap and to keep your pack stabilized. Usages: bag strap adjuster, garment buckle, work wear, etc.

Material：POM

Quick attach sternum webbing adjuster which has opening design on middle inner bar, easy to apply on straps, detachable and adjustable based on requirement. Provide an extra gripping point for the sternum strap with a loop on one side, designed to finish your backpack harness with a chest strap and to keep your pack stabilized. Available size: 3/4" (20 mm). Usages: bag strap adjuster, garment buckle, work wear, etc.

Material：POM

Applicable for 25mm and 20mm webbing. Quick attach sternum webbing adjuster which has opening design on both outer bars, easy to be applied, detachable and adjustable. Provide an extra gripping point for the sternum strap with a loop on one side, designed to finish your backpack harness with a chest strap and to keep your pack stabilized. Usages: bag strap adjuster, garment buckle, work wear, etc.

Material：POM

Plastic tri-glide with pin for webbing adjusting, the apprearance is similar to tri-glide, yet there's a pin on center crossbar, which is to adjust and hold the belt in place. Usage: belt adjuster, shoes buckle, garment accessories, etc.

Material：POM or NY

Fasten and fix the drinking tube or radio wire to your backpack, replaceable and easy to attached onto the tactical bag, detachable and adjustable, commonly used on mountaineering equipment and outdoor gear. The clip is also known as hydration bag tube clip, rotatable drinking tube clip, water bladder tube clip.

Material：POM/NY

This slide buckle is curved on four sides, modern, streamlined design that feels smooth and easy to grip, mainly be used to adjust length and tightness of webbing strap.

Material: POM

Compatible with 10mm straps, light-duty, there are tactile grooves on the middle of both sides for easy grabbing.

Material: POM

Plastic Webbing Adjuster for 1 Inch Straps. The Detachable Tri-Glide Buckle is a practical webbing adjuster designed for 1" (25mm) straps, allowing users to easily adjust or replace webbing when needed. Featuring a unique slot on the middle bar, this plastic strap slider provides a secure hold while offering quick detachability.

At Ji-Horng Plastic, we manufacture a wide range of tri-glide buckles in different sizes, materials, and styles to meet diverse applications such as backpacks, pet harnesses, luggage, outdoor gear, and safety equipment.

Contact us today to request free adjustable buckle samples and find the perfect plastic webbing hardware solution for your products.

Material: NY

Tri-Glide is a kind of adjustable buckle that adjusts the tightness and length of the strap. This buckle has equidistant tooth-like protrusions on the cross bar, which can increase the friction to a greater extent and fix the webbing passing through its cross bar, the webbing won't slide easily as the teeth grab the webbing tightly.

Material：POM

Material：POM

Different from general tri-glide buckles, # BH07A has two different inner widths, so it can also be called reducing ring, compatible with 3/4" (20mm) and 1" (25mm) webbing, with round bone structure and smooth surface.