1 inch (25 mm)

ji-horng-plastic-webbing-slider-buckle-b5

Adjustable Slide

B5

Material:POM

Also known as tri-glide, after going through the webbing, it can be pushed forward and backward along the webbing to adjust the length and tightness, the backs of the upper and lower crossbars have toothed anti-slip designs, which can firmly grab the webbing well without slipping. Ideal part for pet harness, collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

ji-horng-plastic-strap-adjusting-buckle-b5a

Webbing Adjust Slide

B5A

Material:POM

Also known as tri-glide, which is used for adjusting length of webbing, toothed anti-slip design at the back to prevent loosing.
Usage: pet collar buckle, backpack strap buckle, medical sling adjuster, garment accessories, etc.

ji-horng-plastic-strap-adjust-eight-shaped-buckle-b6

Eight-Shaped Slide

B6

Material:POM

Also known as eight-shaped buckle, figure eight buckle, or tri-glide, this slide buckle is generally thinner, so it is an ideal adjustable buckle for lingeries, underwear, or accessoires that are close to skin, there will be no obvious foreign body sensation when wearing it. They are mainly applied for adjusting webbing, lanyard strap, bra strap buckle, goggle adjuster, etc.

ji-horng-plastic-adjust-strap-buckle-with-dual-loop-b7

Slide w/ Dual Loop

B7

Material:POM

Plastic webbing adjusting slider buckle which has anti-slip design, also known as 4 way slide buckle or tri-glide. Provide extra gripping points for the sternum strap with loops on both sides, designed to finish your backpack harness with a chest strap and to keep your pack stabilized. Available for two sizes: 1" (25mm) and 3/4" (20mm). Usages: bag strap adjuster, garment buckle, work wear, etc.

ji-horng-strap-adjust-buckle-with-single-loop-b7a

Slide w/ Single Sternum Loop

B7A

Material:POM

Plastic webbing adjusting slider buckle which has anti-slip design, also known as 3 way slide buckle or tri-glide. Provide an extra gripping point for the sternum strap with a loop on one side, designed to finish your backpack harness with a perpendicular chest strap and to keep your pack stabilized. Usages: bag strap adjuster, garment buckle, work wear, etc.

ji-horng-strap-adjust-slide-buckle-with-single-loop-b8a

Quick Attach Slide+Single Loop

B8A

Material:POM

Applicable for 25mm and 20mm webbing. Quick attach sternum webbing adjuster which has opening design on both outer bars, easy to be applied, detachable and adjustable. Provide an extra gripping point for the sternum strap with a loop on one side, designed to finish your backpack harness with a chest strap and to keep your pack stabilized. Usages: bag strap adjuster, garment buckle, work wear, etc.

ji-horng-plastic-water-tube-clip-buckle-B11

Water Tube Clip Slide

B11

Material:POM or NY

Fasten and fix the drinking tube or radio wire to your backpack, replaceable and easy to attached onto the tactical bag, detachable and adjustable, commonly used on mountaineering equipment and outdoor gear. The clip is also known as hydration bag tube clip, rotatable drinking tube clip, water bladder tube clip.

Plastic Curved Tri Glide Buckle-B12-FRONT

Curved Tri-Glide

B12

Material:POM/NY

This slide buckle is curved on four sides, modern, streamlined design that feels smooth and easy to grip, mainly be used to adjust length and tightness of webbing strap.

Heavy Duty Slide Buckle-BH03A

Heavy Duty Slide Buckle

BH03A

Material:POM

Sternum Slide Adjust Buckle-BH08A

Sternum Tri-Glide Adjuster

BH08A

Material:POM

Slide buckle used on sternum strap, with additional single side loop. Applicable size is 1", and 3/4" for the sternum strap.

ji-horng-plastic-side-release-parachute-buckle-s1

Side Release Buckle

S1

Material:POM

Two main parts including male part and female part.
Side release breakaway buckle with angular appearance and anti-slip design on male part of buckle.
Usage: bag buckle, arm sling buckle, etc.

ji-honrg-plastic-side-release-buckle-dual-adjust-s1d

Dual Side Release Buckle

S1D

Material:POM

This side release buckle has two components: a male buckle and a female buckle. The length of the webbing on both sides can be adjusted according to users' requirement, and the tightness is fixed through the anti-slip pattern design on the buckle. Paired with webbing, drawstrings, etc., it can be used as a backpack buckle, tool belt buckle, webbing adjustment accessory, etc. Press the buttons on both sides of the buckle with two fingers at the same time and pull out the male buckle to unlock the buckle, the buckle can be released and fastened for tens of thousands times.

ji-horng-plastic-contoured-dual-adjust-buckle-s1cd

Dual Contoured Side Release Buckle

S1CD

Material:POM

Two main parts including male and female parts. Acetal quick release dual adjustable plastic buckle with contoured appearance, adjust length of webbing and fasten easily, release the buckle by squeezing both sides of the button at one time, and then fasten the buckle by pushing the male part into the female part in correct direction. Usage: bag buckle, parachute buckle, webbing adjuster, baby carrier, etc. Available sizes in 20mm, 25mm, 38mm, 50mm.

ji-horng-plastic-side-release-buckle-s2

Side Release Buckle

S2

Material:POM

Plastic quick release buckle, breakaway clasp. Two main parts including male part and female part, there are anti-slip texture on the side buttons of male buckle, male side is adjustable, which can be used to adjust length of strap to maintain proper tightness, 3/8" (10 mm) is non-adjustable, a slide buckle is required to get webbing adjusted. Usage: bag buckle, webbing adjuster, harness buckle, etc.

ji-horng-belt-plastic-side-release-buckle-s3

Side Release Buckle

S3

Material:POM

Plastic side release buckle for tool belt, waist band, etc. Two main parts including male part and female part, there's no second crossbar either on male or female buckle, so it is generally used on elastic straps or match with an additional webbing adjuster, applicable with 1" (25 mm) webbing.

ji-horng-plastic-center-quick-release-buckle-s4

Double Bar Center Release Buckle

S4

Material:POM

Plastic center push quick release buckle, two main parts including male part and female part. The male buckle has an opening on the outer crossbar and a double-rod design, making it easier to detach or adjust the webbing based on requirement, unlock by pressing textured front center button on male buckle and then pull it out from the female buckle.

ji-horng-plastic-side-release-buckle-s5

Side Release Buckle

S5

Material:POM

Two main parts including male part and female part. Unlike other common side release buckle with crossbars on both male and female side, this buckle has a hole on male part, fasten the male buckle by passing through the textile along with the top gap, and snapped it by mounting rivet or screw through the hole, this buckle is generally used on bags.

ji-horng-plastic-side-release-collar-buckle-s6d

Contoured Side Release Buckle

S6D

Material:POM

Plastic contoured side release clasp, including male part and female part, used as pet collar buckle, paracord bracelat buckle, etc. Five sizes available: 10mm, 12mm, 15mm, 20mm, 25mm.

ji-honrg-plastic-heavy-duty-side-release-buckle-s6dh

Heavy Side Release Buckle

S6DH

Material:POM

Plastic heavy duty side release buckle which has stronger tensile strength, including male part and female part, used as bag buckle, webbing adjuster, collar buckle, etc. This high-strength buckle has a thick and sturdy structural design that can maintain the buckle locked under high-intensity pulling force without loosening, 6 sizes available: 3/8", 5/8", 3/4", 1", 1-1/8", and 1-1/2".

ji-horng-plastic-reflection-side-release-buckle-s7

Reflection Side Release Buckle

S7

Material:POM

Plastic side release buckle, including make part and female part, there's a reflective plastic chip mounted on the female part, which is used for warning or making it easier to be seen in the dark.